Free CNC project files

Browse 2723 cut-ready, mill-ready, and print-ready CNC project files on FireShare.

• Laptop Stand for Crossfire

  Weld together laptop stand that bolts to the leg of the Crossfire. The whole project easily fits on one 2'x2' sheet of 1/8" steel. Bend and weld as seen in the pictures. full welding is not required or recommended. Just skip weld as necessary. Note that the small slots will require some very small lead in/lead outs. You will need to buy: Hinge: 7-7/8 x 1-1/8" weld on hinge. I get these for a few bucks at my local metal supplier or amazon. https://www.amazon.com/dp/B0086A38SC/?coliid=I2KK0YIC6MKJTI&colid=2DJLLXT3ZFW4W&psc=0&ref_=lv_ov_lig_dp_it Velcro strap for laptop: (optional) https://www.amazon.com/dp/B000LNSSVY/?coliid=IN2TYTL9YGPSM&colid=2DJLLXT3ZFW4W&psc=0&ref_=lv_ov_lig_dp_it Bolts: 3/8-16 x 2-3/4" hex bolt Qty:4 3/8-16 nut Qty:4 1/4-20 x 3/4" hex bolt Qty:2 1/4-20 nut Qty:2

• F Bomb Bottle Opener

  I created this design from other, I don't know who originally designed this. Other versions had duplicate and incomplete vectors. This one extrudes and cuts correctly for me. Pictured is 1/8" cold rolled steal 80ipm 30amps .080 nozzle .060 standoff/spacer. 1/8 is a little thick. 12gauge is better to fit various sized bottles. Feel free to modify the over all size or the bottle opener dimension. This cuts out at about 5.75" long.

• Wall Mounted Grinder Rack

  A wall mounted rack for hanging your grinding tools.

• Welding Tank hook

  Hank whatever you want from your cylinder neck

• F bomb Cleaned up

  Simply redrawn to fix open paths, fix angles, widths and to make it symmetrical, all features are on same plane/level now, also made inside cuts 1 color and outside another color

• Air Tool Holder

  I just added some flair to it and a photo of the finished sketch

• Flag with Eagle

  Made this for the peak of the front of my shop. Going to have back lighting with red white and blue LED lights. I will post the finished project when done. Enjoy!!

• World Map

  A beautiful metal world map mounted on dark stained wood backing.

• Horse Welcome Sign

  Uploaded the dxf so this can be modified. Have fun.

• 10 Inch Welding Fixture (Weld Together Project)

  Tab and slot designed welding fixture, this DXF is setup for be run on 1/4" Mild Steel then welded together. I plan on making a few sizes of these. The holes are cut for a fixture style table.

• 20x20 Fire Pit

  Very Simple Fire Pit. Steel is 12g You will need: 4 sides 1 base Plate 1 leg (file makes 4 legs) Assembly: Each side should be angled somewhere around 50degs. I tacked on the inside until I had all 4 sides on. Then welded up the entire outside seem. You can either chose to grind down the welds like I did or just leave them. The legs I desgined so they can be bent. I found this just made getting a square base a lot eaiser. I finished mine off with High heat paint from lowes (the 2000f stuff) im sure after awhile I will need to re paint Depending on where you get your metal it costs around $30ish dollars to make not including paint.

• Throwing Star 6pt

  I cut them out of 16 gague hot rolled steel and they're fun as a decoration and to throw into fences or trees. I didn't grind or sharpen mine at all but imagine a slight grind and making them out of stainless would be pretty sweet too. Takes like 20 seconds to cut.

• Christmas Ornaments

  A sled, Christmas tree, and snowflake ornaments.

• split letters

  split letters for monograms

• Architectural Plate

  A decorative steel connector plate for your wood framing projects.

• Tactical hatchet

  Tactical hatchet **** file was resized for hatchet pictured to be approximately 18" tall****

• Table Top Rose

  I designed this file last year and was selling it on Etsy. Well its been copied, resold, and changed so many times I decided to not sell it anymore so im posting it here. I typically cut this out of 14 gauge. Enjoy!

• split letters 2

  split letters for monograms

• Laptop Stand for Crossfire w/ Mouse Space

  Same design I just made it bigger to accommodate for a mouse.

• Metal Skateboard

  Metal Skateboard that was cut out in the Langmuir Systems promo video. We cut it out of 3/8" aluminum, but this could probably be made of out of 1/4" aluminum or 3/16" steel.

• CLAMPS HOLDER WALL MOUNT RACK

  clamp holder using 1/8 steel weld together for who dont have bender.

• flag

  what an awesome flag you make it to small the little holes wont cut

• Bass Fish

  This is a simplified Bass Fish with bridged elements.

• Tube Clamp

  Simple tube clamp to act as a helping hang on rollcages, etc. Buyout list: 1/2-13x1" hex bolt Qty:1 1/2-13x3" full thread hex bolt Qty:4 1/2-13 hex nut Qty:5 Note: The hook shaped parts are offset. be sure to keep them paired together during assembly.

• Air Tool Holder 10 Spot

  wall bracket for 10 air tools, works with automotive and standard style male air fittings. bend slots included for those like myself with limited bending aparatae. credit to Matthew Russo for the inspiration and base cad file via FireShare.

• Bear Mountain Sign

  DXF will need modified to work for you

• Small Outdoor Fire Pit

  Small fire pit made from 1/16" steel welded together. Approximate size is 33" x 33" x 15" height.

• Mountain Silhouette Address Plaque

  This is a remix from the Langmuir Systems Mountain Silhouette. Just add your address numbers, or anything else you can think of.

• Blank Tree Of Life

  Blank Tree of Life

• Throwing Knife for test cutting

  I use this small throwing knife for test cuts. It throws pretty well too.

• Four bottle wall mounted Wine Rack.

  Cut out part and then use an adjustable wrench to bend out each ring 90 degrees. I used 1/8 steel.

• My Tree of Life project

  I wife found this image on the Internet. I Converted it to a SVG in Inkscape then tool pathed it in Fusion360 for my Crossfire Pro.

• Stars & Stripes Pistol

  G-code size 10.5" x 7.55"

• Torch Shield for Xfire

  I was getting some water splash onto my torch handle, right on the trigger, which is not water proof or Water resistant. I decided to cut this out of alum (had some laying around) to mitigate this issue (since water and elect switch = headache sooner than later) Simple cut, alum settings of 120/min at 20 amps with a 0.1 pierce delay worked great. Holes are a little messy but can be cleaned up with a drill bit or dropping the amps down some more (maybe 15?). 30* bends on each side (or as you see fit) with a bench bender and the attachment tab was done with hand held bend pliers. I put a little bit of angle on it too so that if I do get water droplets inside it will act as a gutter. Length is 6.5 inch long.

• Beer Opener Keychain

  A remix of my original bottle opener, this time it's specifically used to open beer! Dimensions: 5.5"x1.5"

• Cooking Castle - A flat pack rocket stove

  This is a re-mix of the Rocket King on Amazon. I took my inspiration from that design, however I added a bottom plate, a top grate, an upper shelf position, changed the dimensions, thickness, air inlets, shelf, and storage method. This flat pack rocket stove is 10"x7"x7" plus the shelf. The shelf has two positions, one near the bottom to load wood fuel, and one at the top to support canned fuel. The base has a bottom plate to contain ash, and has air inlet holes on all for sides for even air flow. These holes double as a place to add a carabiner to clip all of the parts for storage. The upper grate supports smaller pots or cans, and also adds rigidity to the stove. The unit pictured is 14ga aluminum with clearances for easy fitment. If you want to use thinner material, I suggest tightening up the fitment slots, or just adding nubs to them. If making this out of aluminum, the top grate must be steel.

• F-Bomb Remix`

  updated F-Bomb, better lines

• Hummingbird Feeder Hanger

  There are two patterns provided here, one for 12 Ga and one for 14Ga. If you scale the pattern be sure to also adjust the two rectangular through holes according to your material thickness. A couple of quick tack welds will lock these together. Finished product is 1.9" wide, 13.6" tall and 14.8" long as drawn.

• Elk Welcome Sign

  Welcome sign designed at approx 20" x 20". Both SVG and DXF attached for your use or remix.

• Angle Grinder Hanger

  Two .dxf files are attached, one is a slightly extended version for hanging a grinder with a wire cup attached. These were cut from 1/16" Steel Sheet and painted with remnants of Rustoleum rattle can laying around in the shop. I've found that two screws to attach to the wall is overkill, the the top hole serves very well. Have at it, and enjoy!

• x10 Paint Can Holder

  Holds 10 Paint cans and can be bent using a 20TON Swag offroad press brake or you can cut the relief lines in with a second program with no lead in or lead outs so that you can bend and weld it together. The mounting holes are setup for 16 or center to mount to studs perfectly.

• 1/4” Hole Flat Weld Tab ½” Standoff

  Flat weld tab for fabrication. Standoff distance is measured as the distance from the bottom of the tab to the center of the hole.

• Butterfly

  This is a metal butterfly that I made because I liked it.

• christmas truck

  not designed by me. got from a free group cant remember who made it

• Bottle Opener Blank

  Blank bottle opener design ready to customize. After cutting this out of 14 ga steel, I finished with belt sander and hammer forged the tab to a slight angle. Great for logos, initials, etc...

• Laptop stand for crossfire PRO

  This is a remix of the original laptop stand by Wyatt Lassiter, made for the Crossfire PRO, so it bolts to the corner of the table instead of a leg since the PRO's gussets make the leg not usable. I added gussets and widened the piece attached to the bottom of the laptop holder part to stiffen it up since I was going to use thinner material, if you are using the 1/8" that was suggested, it may not be necessary. I also modified the main piece and added brackets to hold a three piece pipe hinge instead of the original purchased hinge because that's what I had. They're sized for 1.5" OD pipe but feel free to adjust for what you have.

• Rustic USA Flag

  This is a USA flag that mounts to a plank of wood. You will need to cut out the Flag Main and three Flag Straps to create the entire project.

• DOG MOM

  One of my first projects with my crossfire pro, cutting speed is a little slow (40 IPM)I believe so check that out before cutting. I believe you need a 12 x 8 sheet I used 1/16" thickness. Hope it works out for everyone. This is cut ready. Used a Hypertherm 30XP with regular consumables (not fine cut)

• split letters 3

  split letters for monograms

• F BOMB BOTTLE OPENER. ready to cut

  Setup for Hypertherm 45 sync, fine cut tip, on 14 ga. mild steel with crossfire pro