20x20 Fire Pit

Very Simple Fire Pit.

Steel is 12g

You will need:

4 sides

1 base Plate

1 leg (file makes 4 legs)

Assembly:

Each side should be angled somewhere around 50degs. I tacked on the inside until I had all 4 sides on. Then welded up the entire outside seem. You can either chose to grind down the welds like I did or just leave them.

The legs I desgined so they can be bent. I found this just made getting a square base a lot eaiser.

I finished mine off with High heat paint from lowes (the 2000f stuff) im sure after awhile I will need to re paint

Depending on where you get your metal it costs around $30ish dollars to make not including paint.